Edit Scene Target - HDL Granite Display User Manual

Granite Display (Buspro) User Manual
Figure 5-2 Scene target

5.2 Edit Scene Target

Click ">" at the end of the scene to show all the targets in the scene, as shown in Figure 5-2.
Edit the "Subnet ID", "Device ID" and "Type" of corresponding device in the target list. The
list on the right shows all the added devices (click "Fast search" in the main page of Buspro
Setup Tool 2 to search for all added devices), drag the target from right to left can also add
the target to the scene (Please refer to Add Light for reference.).
Param 1 to 4 defers from the type selected. For example, if "Universal switch" is selected,
Param 1 refers to "Switch No.", and Param 2 refers to "Switch Status", as shown in Figure
5-3.
Click "Save target" after editing all targets. Click "Save" button after editing all scenes.
HDL Automation Co., Ltd.
http://www.hdlautomation.com 18