2.7
NFU Steering Lever
2.8
Hand held remote
Note !
2.9
Standby-Nav mode
20220513E
The rudder will move as long as the lever is offset to Port or
Starboard.
REMOTE
STBY-AUTO
R3000X
When in AUTO mode, pressing the buttons will change
the set course 1° each press. If you keep the button
pressed, it will automatically change the course at a rate
of 3 ° /second. Refer to page 35 for further information.
When a Navigation receiver is connected to the AP11 you
can steer the boat manually using the STBY-NAV mode
display(s) as shown, or you can steer the boat automatically
using the Nav. receiver signals to adjust the boats course to
steer (see page 28).
Instruction manual
Push buttons for Port and
Stbd NFU commands
STBY/AUTO mode button.
AUTO mode is when lamp is lit
21