Advertisement
Code
Function
554 Modem test
555 Scanner test
556 Motor test
557 LED test
558 LCD test
559 Setting the
document jam
detection
561 KEY test
570 Setting the % break 1:61% 2:67%
571 Setting the number
of times that ITS is
redialed
572 Setting the ITS
redial interval
573 Setting of number
of rings for
REMOTE TURN ON
590 Setting the number
of FAX redial times
591 Setting the FAX
redial interval
592 Designation of CNG
sending
593 Setting the interval
between CED and
the 300 bps signal
Set Value
Effective
1:ON 2:OFF
00~99
001~999 sec
001~999
01~99
00~99
001~999 sec
001~999
1: OFF 2:ALL 3:
AUTO
1: 75 msec 2:500
msec 3:1000
msec
95
Default
Range
1, 2
1
1, 2
1
00~99
5 times
065 sec
01~99
10 times
00~99
05 times
065 sec
1, 2, 3
2
1, 2, 3
1
Remarks
Press "START/COPY/SET".
Press "START/COPY/SET".
Press "START/COPY/SET".
Press "START/COPY/SET".
Press "START/COPY/SET".
Selects the jam detection of
document during FAX
transmission/copying.
Press any key.
Sets the % break of pulse dialing.
Selects the number of times
ITS is redialed (not including
first dial).
Sets the interval of ITS redialing.
Sets the number of rings before
the unit starts to receive a
document in the TEL mode.
Selects the number of redial
during FAX communication
including the first dial).
Sets the FAX redial interval
FAX communication.
Lets you select the CNG output
during FAX transmission.
CNG is output at phase A.
CNG is output only when
automatic dialing is performed.
OFF: CNG is not output at
Sets the interval between the
signal and subsequent 300
signal. (See "5. Unit can copy,
cannot transmit/receive long
distance or international
communications" in
FACSIMILE SECTION
DEFECTIVE
().)
Advertisement
