Advertisement
<TX side signal>
2nd / 3rd DCS / Training
2nd / 3rd EOP / EOM / MPS
delayed DCS
2.3.5.1.6. THE UNIT CAN COPY, BUT THE TRANSMISSION AND RECEPTION IMAGE ARE
INCORRECT
(Long distance or international communication operation)
This symptom highly depends on the transmission and reception capability of the other FAX
unit and the line conditions.
The countermeasures for this unit are shown below.
Transmission Operation:
Set the transmitting speed to 4800BPS (service mode: code No. 717) or select the overseas
mode.
Reception Operation:
If 80% or more of the reception is incorrect, set the receiving speed to 4800BPS. (Service mode:
code No. 718)
<RX side signal>
& delayed CFR / FTT
& delayed MCF / PIP / PIN / RTP
/ RTN
& 2nd / 3rd / --- DIS
(Fig. e)
56
<Countermeasure>
at TX side
at TX side
at RX side
Advertisement
