Advertisement
Recommended power consumption is between 30 W to 40 W. /
Temperature of Copper Rod 662 ± 50°F (350 ± 10°C) / (An expert
may handle a 60~80 W iron, but a beginner might damage the foil
by overheating.)
- Flux / HI115 Specific gravity 0.863 / (Original flux should be
replaced daily.)
4.2. FLAT PACKAGE IC REMOVAL PROCEDURE
1. When all of the IC lead cannot been seen at the standard degree,
fill with large quantities of solder.
Note:
If you do not fill with solder and directly cut the IC lead with the cutter, stress may build up
directly in the P.C. board's pattern. If you do not fill with large quantities of solder as in step 1,
the P.C. board pattern may be removed.
2. Using a cutter, cut the lead at the source. (Cut the contents with a
cutter lightly, 5 or 6 times.)
115
Advertisement
