Advertisement
Test Mode
Type of Mode
SCAN CHECK
Service Mode
LCD CHECK
Service Mode
DTMF SINGLE
Service Mode
TEST
KEY CHECK
Service Mode
FACTORY SET Service Mode
SENSOR
Service Mode
CHECK & VOX
CHECK
2.5.1. DTMF SINGLE TONE TRANSMIT SELECTION
When set to ON (=1), the 12 keys and transmission frequencies are as shown.
Code
Operation after
code input
"5" "5" "5"
Tums on the LEDs of the image sensor and operates
read systems.
START
"5" "5" "8"
Checks the LCD indication.Illuminates all the dots
if they are normal.
START
"5" "5" "2"
Outputs the DTMF as single tones. Used to check
frequencies of the individual DTMF tones. Refer to
1....ON
SINGLE TONE TRANSMIT SELECTION
2....OFF
"5" "6" "1"
Checks the button operation.
Indicates the button code on the LCD while the button
START (any
pressed. Refer to
key)
"5" "5" "0"
Clears the memory where the users can store data.
START
CHECKS THE SENSOR OPERATION
"8" "1" "5"
After entering this mode, perform the copy operation.
START
For each sensor's operation, refer to
SWITCHES().
[Do Sn Pa] : LCD DISPLAY
Do: Document set sensor
:Paper inserted. Turns on when a document is inserted.
Sn: Read position sensor.
:At the read position, turns on when the front cover
opened and the sensor lever is pressed directory.
Pa: Recording Paper Sensor
:Set Recording Paper. Turns on and off when the
lock lever is pushed down and up.
101
Function
BUTTON CODE TABLE
SENSORS AND
().
().
Advertisement
