Advertisement
6. EQM
EQM means Eye Quality Monitor. Used only at the factory.
7. ERROR LINE(RX)
When an error occurs while receiving a fax, this shows the
number of error lines.
8. MAKER CODE
This shows a 2 digit code of the other partyís fax machine brand.
0E: "KX" model / 00: Unknown / 79: "UF" model / 19: "Xerox"
model
2.4.7.2. PRINTOUT EXAMPLE
2.5. TEST FUNCTIONS
Test Mode
Type of Mode
PRINT TEST
Service Mode
MOTOR TEST
Service Mode
MODEM TEST
Service Mode
ROM CHECK
Service Mode
Code
Operation after
code input
"8" "5"
Prints a test pattem and checks the thermal head
abnormalities (missing dots, etc), and also checks
START
operation of the reception motor.(Refer to
"5" "5" "6"
Rotates the transmission and reception motors to
the operation of the motors.
START
0.....Stop
1.....Turn forward TX roller at 400pps 2-2 phase
2.....Turn forward TX roller at 400pps 1-2 phase
3.....Turn forward RX roller at 400pps 2-2 phase
4.....Turn forward RX roller at 400pps 1-2 phase
5.....Turn forward TX/RX roller at 400pps 1-2 phase
6.....Reverse the motor at 400pps 1-2 phase
7.....Set the cam gear to the home position
8.....Set the cam gear to the RX mode
9.....Set the cam gear to the copy mode
press the STOP button to cansel.
"5" "5" "4"
Sends four kinds of FAX signals to check the sending
function of the modem. / 1)1100 Hz: Consecutive signal
START
EOM for tonal / 2)2100 Hz: G2 carrier signal / Consecutive
of CED signal / 3)G3,V29 training signal [modulation
of carrier signal (1700 Hz )]
"5" "5" "1"
Indicates the version and checks the sum of the ROM.
START
100
Function
JOURNAL
Advertisement
