Advertisement
5.5.1. MOTOR POSITION SENSOR
This sensor is a detection switch for recording the position of the CAM.
Digital
Board
Signal (IC1-174
Home
Low level
position
Other
High level
5.5.2. COVER OPEN AND PAPER SET SWITCH (SW1)
When there is no recording paper, the plate is separated from the switch lever and the switch
turns off. / Pin 9 of CN101 (Analog board) becomes a high level. / When there is recording paper,
the plate pushes the switch lever and the switch turns ON. / Pin 9 of CN101 (Analog board)
becomes a low level.
Pin)
143
Advertisement
