Advertisement
1.15.2.1. MAINTENANCE LIST
NO.
OPERATION
1
Document Path
2
Rollers
3
Thermal Head
4
Glass
5
Sensors
6
Abnormal, wear and tear or
loose parts
1.15.2.2. MAINTENANCE CYCLE
CHECK
Remove any foreign matter such as
paper.
If the roller is dirty, clean it with a damp
cloth then dry thoroughly.
If the thermal head is dirty, clean the
printing surface with a cloth moistened
with denatured alcohol (alcohol without
water), then dry thoroughly.
If the glass is dirty, clean the with a dry
soft cloth.
Document sensor (PS1), Read position
sensor (PS2), Recording paper/cover
open sensor (SW1) Jam sensor (SW3).
If the glass is dirty, clean them with a dry
soft cloth.
25
REMARKS
—
See
CLEANING
(
See
CLEANING
(
DISASSEMBLY
INSTRUCTIONS
See
CLEANING
(
See
SENSOR SECTION
and
SENSORS AND
SWITCHES
() .
—
Advertisement
