Table of Contents
Advertisement
Remote Interface Operation:
internal DMM relay or module channel relays, send the following commands.
DIAG:DMM:CYCLES? 2
DIAG:RELAY:CYCLES? (@1003,1013)
To reset the cycle count on the specified module channel relays, send the
following command (the instrument must be unsecured).
DIAG:RELAY:CYCLES:CLEAR (@1003,1911)
SCPI Language Version
The instrument complies with the rules and conventions of the present
version of SCPI (Standard Commands for Programmable Instruments).
You can determine the SCPI version with which the instrument is in
compliance by sending a command from the remote interface.
• You can query the SCPI version from the remote interface only.
• The SCPI version is returned in the form "YYYY.V", where "YYYY"
Remote Interface Operation:
34980A User's Guide
represents the year of the version, and "V" represents a version number
for that year (for example, 1994.0).
To read the count on either the specified
SYSTem:VERSion?
Features and Functions
2
69
Advertisement
Table of Contents
