Table of Contents
Advertisement
Monitor Control Function
MODE
MENU
SCRN
MODE
SCRN
Video input terminal (AV-IN 2)
6
V.SRC
TV-MONITOR WIDE VISION
VIDEO
- IN -
AUDIO
MENU
V.SRC
(3,5ø-Mono)
Audio input terminal (AV-IN 2)
(3,5ø-Stereo)
Switching the AV Output Picture
Each time you press the V.SRC button for one second
or more, AV output picture switches as follows:
NORMAL:
Picture selected from the TV
control screen
TV:
Picture of television
VD2:
Picture input from the front
AV-IN terminal
Note
The unit will not operate when the "IN-OUT" switch is
set to "IN" (Page 31).
Switching to the Angle/Screen Control
Screen
Pressing the SCRN button will cause the angle control
screen (monitor angle adjustment mode) or screen
control screen (screen adjustment mode) to be display-
ed on the TV or video picture.
Turning the Monitor Picture Off
Hold down the SCRN button for two seconds or more
to turn the monitor's picture off.
Note
The picture reappears when the one of the SCRN,
MENU, MODE or V.SRC buttons is pressed.
Switching to the Source Control Screen
Press the MENU button to switch to the source control
screen.
Changing the Background of the Source
Control Screen Picture
Each time you press the MENU button, you can select
the background between 5 different patterns for the
source control screen and menu screen.
Adjusting the Volume
When the FM-AM TUNER wide vision is not connected
to the system:
Press the
button to increase the volume of the built-
in speaker.
Press the
button to decrease the volume of the built-
in speaker.
When the FM-AM TUNER wide vision is connected:
Press the
button to increase the volume of the FM-
AM TUNER wide vision.
Press the
button to decrease the volume of the FM-
AM TUNER wide vision.
Advertisement
Table of Contents
