Table of Contents
Advertisement
FM/AM Tuner Control Function
Tuner Control Screen (Shift)
T I
A M
F M 1
P 1
F M - I N F O
MANU
ALM
SEEK
AME
MONO
Auto Memory Entry
You can automatically store all the receivable fre-
quencies in the band currently being listened to,
and then recall them with the touch of a button la-
ter. This function is especially useful when you are
travelling and do not know what station are availa-
ble. Up to 6 frequencies can be stored this way.
1
Select the band for auto memory entry.
2
Touch [ AME].
[
] and [
] blink.
3
Touch [
] or [
The preset station numbers [ P1 ]- [ P6 ] are shown
in order.
When all the stations in a certain band are stored
in the preset memory, the auto memory entry stops.
The tuner then plays the last station received.
Note
•
When the AF function is turned on whilst auto me-
mory entry takes place, only RDS stations (i.e.,
stations with RDS capability) are stored. RDS stati-
ons that have been preset for FM1 cannot also be
preset in FM2 or FM3.
•
When the local seek function is turned whilst auto
memory entry takes place, stations with poor re-
ception are not stored.
•
When the Traffic Information function is on, only
the local traffic information station frequency will be
stored.
Turning the Monaural Reception On/Off
When poor stereo reception is experienced, this
function will reduce noise and improve listening
conditions.
Touch [ MONO ] to switch the monaural reception on
and off.
The MONO indicator is displayed when monaural re-
ception is on.
M E N U
1 2 : 0 0
T U N E R
F M
1 0 8 . 0
M
Hz
NEWS
REG
AF
TI
ST
PTY
TI VOL
LO.S
] to start auto memory entry.
Selecting theTuning Mode
You can choose from three tuning modes: auto
seek, preset station seek, and manual. The
"AUTO1" indicator is displayed when auto seek tu-
ning is selected, and the "AUTO2" indicator is dis-
played when preset station seek tuning is selected.
Each time you touch [ SEEK ], the mode switches as
follows:
AUTO 1
(Auto Seek Tuning)
AUTO 2
(Preset Station Seek Tuning)
MANU
(Manual Tuning)
Turning the Local Seek Function On/Off
With the local seek function turned on, auto seek
tuning skips stations with relatively poor reception.
Touch [ LO.S ] to switch the local seek function on and
off.
The LO.S indicator is displayed when the local seek
function is on.
19
Advertisement
Table of Contents
