Table of Contents
Advertisement
System Setup Function
Changing the Function Setting:
Touch [
] or [
] repeatedly until the desired setting
is displayed.
Touch [
] to increase the interval, and the [
crease it.
OFF ÷ 00 min. ÷ 10 min. ÷ 20 min. ÷ 30 min. ÷
40 min. ÷ 50 min. ÷ 60 min. ÷ 70 min. ÷ 80 min. ÷
90 min
(min = minutes)
When you select the news interruption timeout interval,
the News function turns on and the NEWS indicator is
displayed.
When a news bulletin is received, the NEWS indicator
will blink and reception will begin at the preset volume.
Note
•
If you choose the "20min" setting, further news
bulletins will not be received for 20 minutes once
the first news bulletin is received.
Setting the interval at the "OFF" factory default in-
dicates no News Timeout will be made, meaning
that additional news bulletins will continue to be
searched for.
•
This function is only available if the desired station
sends PTY-code for news bulletin or belongs to
EON-Network sending PTY-code for news bulletin.
Alternative Frequency Function [AF]
When poor reception is experienced automatically
switch to another frequencybroadcasting the same
programme in the same RDS network with better
reception.
The AF indicator is displayed when the AF function
is turned on.
Turning AF Function On/Off:
Touch [ ON ] or [ OFF ] to switch the function on and
off.
ON:
AF function is turned on.
OFF:
AF function is turned off.
When no other stations with stronger reception are
available for the same programme in the RDS network,
you may hear the incoming broadcast in bits and snat-
ches. Turn off the AF function in such a case.
Restricting RDS Region (Region Restrict
Function) [REG]
You can choose whether or not to restrict the RDS
channels, received with the AF function for a parti-
cular network, to a specific region. When the Regi-
on Restrict Function is on, the region is restricted
and the REG indicator is displayed.
Turning Region Restrict Function On/Off:
Touch [ ON ] or [ OFF ] to switch the function on and
off.
ON:
Region restrict function is turned on.
OFF:
Region restrict function is turned off.
Note
Sometimes stations in the same network broadcast dif-
ferent programmes or use different programmes ser-
vice names.
] to de-
Auto TP Seek Function [ATPS]
When the Tl function is on and poor reception conditi-
ons are experienced when listening to a traffic informa-
tion station another traffic information station with bet-
ter reception will be searched for automatically. This
function is on, when unit is first powered on.
Touch [ ON ] or [ OFF ] to switch the function on and
off.
ON:
OFF:
Ending the RDS Setting Screen
Touch [ RTN ] to return to the setup menu screen.
Auto TP seek function is turned on.
Auto TP seek function is turned off.
13
Advertisement
Table of Contents
