Table of Contents
Advertisement
Troubleshooting Guide
The following indications are used to inform you that there is a problem with the connections of the system.
BUS-E50:
Two or more Radio/CD-Changer are connected.
BUS-W08:
Two or more monitors are connected to the BUS terminal.
The following messages are displayed when certain problems are occuring in your system. Take the recom-
mended actions.
EJECT
No disc magazine has been loaded in the changer. The disc magazine is not completely loaded.
Load the disc magazine properly.
No CD In the unit.
Insert the CD.
NO DISC
No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
E-04
No disc has been loaded in the disc magazine.
Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD is scratched a lot.
Clean the CD and load it correctly.
E-99
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.
Check the disc magazine. And then press the reset button on the unit.
If the "E- 99" code does not disappear, consult your nearest service center.
HOLD
The protective circuit in the unit activates when the temperature inside the automatic disc changer
exceeds 60ºC ( 140ºF), stopping all operation.
Cool down the unit by opening the windows or turning on the air conditioner. As the temperature
falls below 60°C (140°F), the disc will start playing again.
34
Advertisement
Table of Contents
