Table of Contents
Advertisement
AMC2 4W | Installation manual
5.13
Tamper Protection
To protect the AMC2 4W against unauthorized access and pre-
vent the AMC2 4W from tampering with sensitive data, the
AMC2 4W offers an additional interface to connect external
tamper contacts. This interface is a potential-free 2-pin plugga-
ble screw connector marked with T. If not using the tamper
contact, short-circuit the contacts with a wire connection.
Fig. 5.24 Location of the tamper protection contact
Bosch Sicherheitssysteme GmbH
Installing | en 49
F.01U.024.965 | V 0.1 | 2006.03
Advertisement
Table of Contents
