Table of Contents
Advertisement
AMC2 4W | Installation manual
5.8
Ethernet Interface
The AMC2 4W offers an additional 10/100 Mbit/s Ethernet auto-
sensing interface to connect to a local area network or host
computer.
CAUTION!
Use either a CAT5 crossover cable to connect the AMC2 4W
directly to a computer's network interface or a standard CAT5
patch cable to connect the AMC2 4W to a network hub or net-
work switch.
Fig. 5.16 Location of the Ethernet interface
NOTE!
i
A complete connection diagram of the Ethernet host interface is
shown in chapter Section 7.1 Connecting Diagrams of this docu-
mentation.
Bosch Sicherheitssysteme GmbH
Installing | en 41
F.01U.024.965 | V 0.1 | 2006.03
Advertisement
Table of Contents
