Table of Contents
Advertisement
14 en | Safety Instructions
CAUTION!
You must ground the AMC2 4W. Disconnect both AC and bat-
tery power supply before working on the controller.
Warning! Risk of damage!
Protect the hardware from electrostatic discharge by observing
ESD instructions before unpacking or touching connectors or
electronics.
CAUTION: Lithium Battery
Danger of explosion if battery is replaced incorrectly. Replace
only with the same type as recommended by the manufacturer.
Dispose used batteries according to the battery manufacturer's
instructions.
2.4
Unpacking
Check the packaging for visual damage. If anything has been
damaged during transport, make the transport agency aware of
this.
Carefully unpack the unit. This is an electronic device that must
be handled with care to avoid damage. Do not attempt to put
the unit into operation if components are damaged.
If parts are missing, inform your customer service representa-
tive or a Bosch Security Systems salesperson. The shipping car-
ton is the safest transport container for the unit. Store it and
the other packaging material for future use. If the unit has to be
sent back, use the original packaging.
F.01U.024.965 | V 0.1 | 2006.03
AMC2 4W | Installation manual
Bosch Sicherheitssysteme GmbH
Advertisement
Table of Contents
