Related Manuals for Kramer VM-100CA
Summary of Contents for Kramer VM-100CA
- Page 1 Kramer Electronics, Ltd. USER MANUAL Model: VM-100CA 1:10 Video Component / Audio Distributor...
-
Page 2: Table Of Contents
Figure 4: Connecting a VM-100CA Unit Figure 5: Connecting Several VM-100CA Units Tables Table 1: Front Panel VM-100CA 1:10 Video Component / Audio Distributor Features Table 2: Rear Panel VM-100CA 1:10 Video Component / Audio Distributor Features Table 3: VM-100CA Underside Features... -
Page 3: Introduction
GROUP 6: Accessories and Rack Adapters; GROUP 7: Scan Converters and Scalers; and GROUP 8: Cables and Connectors 2 Download up-to-date Kramer user manuals from our Web site at http://www.kramerelectronics.com 3 The complete list of Kramer cables is on our Web site at http://www.kramerelectronics.com Introduction... -
Page 4: Your Vm-100Ca
Figure 1, Table 1, and Table 2 define the front and rear panels of the VM-100CA 1:10 Video Component / Audio Distributor: 1 For example, you can connect two VM-100CA units to make a 1:20 video component / audio distributor (see section 6.2) Your VM-100CA... -
Page 6: Table 1: Front Panel Vm-100Ca 1:10 Video Component / Audio Distributor Features
Table 1: Front Panel VM-100CA 1:10 Video Component / Audio Distributor Features Feature POWER Switch Table 2: Rear Panel VM-100CA 1:10 Video Component / Audio Distributor Features Feature INPUT TERM Button INPUT RCA Connector LOOP RCA Connector OUT RCA Connector... -
Page 7: Figure 3: Vm-100Ca Underside
Figure 3 and Table 3 define the level trimmers and the EQ. trimmers for Y, B-Y, and R-Y on the underside of the VM-100CA: Table 3: VM-100CA Underside Features Feature B-Y EQ. Trimmer B-Y LEVEL Trimmer R-Y EQ. Trimmer R-Y LEVEL Trimmer Y EQ. -
Page 8: Installing On A Rack
Always mount the machine in the rack before you attach any cables or connect the machine to the power If you are using a Kramer rack adapter kit (for a machine that is not 19"), see the Rack Adapters user... -
Page 9: Connecting The Vm-100Ca
5. If required, adjust B-Y, and R-Y cable compensation equalization level. 1 Switch OFF the power on each device before connecting it to your VM-100CA After connecting your VM-100CA, switch on its power and then switch on the power on each device 2 You can connect up to 10 component video output connectors to up to 10 component video acceptors. -
Page 10: Figure 4: Connecting A Vm-100Ca Unit
Connecting the VM-100CA Figure 4: Connecting a VM-100CA Unit KRAMER: SIMPLE CREATIVE TECHNOLOGY... -
Page 11: Connecting Several Vm-100Ca Units
1 Audio connections are not shown in this example 2 Switch OFF the power on each device before connecting it to a VM-100CA unit. After connecting all VM-100CA units, switch on their power and then switch on the power on each device... -
Page 12: Technical Specifications
3.7 kg (8.2 lbs.) approx. ACCESSORIES: Power cord 1 Specifications are subject to change without notice Technical Specifications of the VM-100CA on RCA connectors AUDIO: 1.8Vpp (S/PDIF); 27Vpp (unbalanced) AUDIO: 333MHz (unbalanced; video compatible) AUDIO: 75dB (unbalanced) AUDIO: Input: AC; Output: DC... - Page 13 EXCLUSION OF DAMAGES The liability of Kramer for any effective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for: Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss;...
- Page 14 For the latest information on our products and a list of Kramer distributors, visit our Web site: www.kramerelectronics.com, where updates to this user manual may be found. We welcome your questions, comments and feedback. Safety Warning: Disconnect the unit from the power supply before opening/servicing.
Need help?
Do you have a question about the VM-100CA and is the answer not in the manual?
Questions and answers