AEG LWX9A9613C User Manual page 38

38 www.aeg.com
• The shortcut
The drain pump can operate
shortly before the appliance
fills water.
2. If necessary, tap on
option list and activate the Child
Lock option. Refer to "Child Lock"
section in the "Options" chapter.
The shortcut
pressed for about three seconds to
deactivate the Child Lock.
Starting a program with delay
start
1. Touch the Start/Pause button to start
the program.
The related led stops flashing and stays
on.
The door is locked.
The appliance starts the countdown and
the door is locked.
2. Tap on Reset to cancel the delay
start and then touch the Start/Pause
button or wait until the countdown is
completed.
The program will start normally.
The ProSense detection
starts at the end of the
countdown.
During the cycle, the display
will inform you about each
running phase (e.g. washing,
rinsing and so on).
.
to enter the
shows up. Keep
14.10 The ProSense load
detection
After touching the Start/Pause button:
1. The ProSense starts the laundry load
detection to calculate the real
program duration. The display
shows the message Adjusting
program to current load.
The appliance adjusts automatically
the program duration to the load to
achieve perfect washing results in
the minimum possible time. The
program duration could increase or
decrease.
2. After about 20 minutes the display
shows the new program duration,
the expected program time and
advise you about the running phase.
The ProSense detection is
carried out with complete
washing programs only.
14.11 Interrupting a program
and changing the options
When the program is running, you can
change only some options:
1. Touch the Start/Pause button .
related led start flashing.
2. Tap on to change the options.
In the option list only the available
options will be active.
3. Touch the Start/Pause button again.
The washing program continues and the
program duration can change.
14.12 Cancelling a running
program
1. Press the On/Off button to cancel the
program and to deactivate the
appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
program.
The