1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer/Dryer
  5. LWR71842BC
  6. User manual

AEG LWR71842BC User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LWR71842BC
USER
MANUAL
EN
User Manual
Washer Dryer

Advertisement

Table of Contents
loading

Related Manuals for AEG LWR71842BC

Summary of Contents for AEG LWR71842BC

  • Page 1 LWR71842BC User Manual Washer Dryer USER MANUAL...

  • Page 2: Table Of Contents

    19. ENVIRONMENTAL CONCERNS..............50 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before beginning the installation and use of this appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.
  • Page 4 1.2 General Safety This appliance is for washing and drying domestic- • type machine-washable and dryable laundry only. Do not use the dryer function if laundry has been • soiled with industrial chemicals. This appliance is designed for single household •...
  • Page 5 ENGLISH The operating water pressure at the water entry point • from the outlet connection must be between 0.5 bar (0.05 MPa) and 10 bar (1.0 MPa). The appliance maximum load is 8.0 kg. Do not exceed • the maximum load of each programme (refer to the "Programmes"...

  • Page 6: Safety Instructions

    The final part of the washer dryer cycle takes place • without heat (cool down cycle) to ensure that items reach a temperature that will not cause damage to them. Do not use high pressure water sprays and/or steam •...
  • Page 7 ENGLISH • Before connection to new pipes, pipes • Remove a detergent ball (if used) not used for a long time, where repair before starting a drying programme. work has been carried out or new • Do not use a detergent ball if setting a devices fitted (water meters, etc.), let non-stop programme.

  • Page 8: Product Description

    • Remove the door catch to prevent for the disposal of Waste Electrical children or pets from becoming and Electronic Equipment (WEEE). trapped in the drum. • Dispose of the appliance in accordance with local requirements 3. PRODUCT DESCRIPTION 3.1 Appliance overview...

  • Page 9: Technical Data

    ENGLISH 4. TECHNICAL DATA Dimension Width/ Height/ Total 59.7 cm /84.7 cm /57.6 cm depth Electrical connection Voltage 230 V Overall power 2100 W Fuse 10 A Frequency 50 Hz Level of protection against ingress of solid particles IPX4 and moisture ensured by the protective cover, ex‐ cept where the low voltage equipment has no pro‐...
  • Page 10 4. Open the door and remove the 8. Pull up the appliance in vertical polystyrene piece from the door seal position. and all the items from the drum. 5. Carefully put the appliance down on 9. Remove the power supply cable and its rear side.
  • Page 11 ENGLISH 11. Pull out the plastic spacers. 12. Put the plastic caps, that you find in the user manual bag, in the holes. The appliance must be level and stable. A correct adjustment of the appliance level prevents the vibration, noise and the movement of the appliance when in operation.
  • Page 12 45º 45º 20º 20º If this occurs, close the water tap and contact the authorized service centre to replace the hose. 5.5 Water drainage The drain hose should be positioned at a height of not less than 60 cm and not Make sure that the inlet hose more than 100 cm from the floor.
  • Page 13 ENGLISH 5. Without the plastic hose guide, to a sink spigot - Put the drain hose in the spigot and tighten it with a clamp. Refer to the illustration. Make sure that the drain hose end is not immersed in the water.

  • Page 14: Control Panel

    The power supply cable must be easily The manufacturer does not accept any accessible after installing the appliance. responsibility for damage or injury through failure to comply with the above For any electrical work required to install safety precaution.
  • Page 15 ENGLISH 6.2 Display Washing phase indicator: it flashes during prewash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spin and drain phase indicator. It flashes during spin and drain phase. Drying phase indicator. Drying time indicator. Door locked indicator. The digital indicator can show: •...

  • Page 16: Dial And Buttons

    Rinse hold indicator. Spin speed indicator. Iron drying indicator. Cupboard drying indicator. Extra drying indicator. 7. DIAL AND BUTTONS 7.1 Zap./Vyp. Touch this button repeatedly until the desired temperature value appears on Pressing this button for a few seconds the display.
  • Page 17 ENGLISH The appliance performs only the The appliance empties spinning phase of the selected the water out washing programme. automatically after 18 hours approximately. The display shows the indicator • Activate the Extra Silent option. (cold), the phase indicator and the The intermediate and the final spin speed.
  • Page 18 On the display the relevant dryness appliance begins the countdown. indicator goes on: 7.7 Rychlý • Iron dry: laundry to be With this option you can decrease the ironed. programme duration. • If your laundry is normally or lightly •...

  • Page 19: Programmes

    ENGLISH 8. PROGRAMMES 8.1 Programme Chart Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range 1400 rpm Eco 40-60 (Wash 1400 rpm - 8.0 kg only mode) 400 rpm 40 °C White cotton and fast-coloured cotton. Normally soiled items.
  • Page 20 Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range Do not use fabric softener Outdoor and make sure that there is no softener residue in 30 °C the detergent dispenser. 40 °C - Cold Outdoor clothing, technical, sport fab‐...
  • Page 21 ENGLISH Programme Reference Maximum Programme description Default tempera‐ spin speed load ture Spin speed Temperature range range Cotton, synthetic and mixed items. Spe‐ cial steam cycle without washing that can Pára be used to prepare your dried laundry for ironing or refreshing garments worn once.
  • Page 22 Programme options compatibility Options ■ ■ ■ ■ ■ ■ ■ ■ Odstřeďování (Spin reduction) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Pouze vypouště‐ ■ ■ ■ ■ ■ ■ ■ ní Pouze odstřeďo‐...
  • Page 23 ENGLISH Options ■ ■ ■ ■ ■ ■ ■ ■ Čas sušení ■ ■ ■ Auto sušení 1) Before setting this option, select a suitable washing programme for the garments. The appliance will performs the most fitting spin cycle for your garments care (e.g. For synthetics items, first select the Syn‐ tetika washing programme and then the Pouze odstřeďování...
  • Page 24 • The wool drying cycle of this machine Fragrance) has been tested and approved by The Woolmark Company. The cycle is The AEG Steam Fragrance allows you to suitable to dry wool garments which refresh even your delicate clothes, are labelled “hand wash” provided...
  • Page 25 • Tumble dry the garments treated with fragrance. Its benefit would The fragrance is available on evaporate. AEG web shop or by • Use the fragrance with different authorised dealer. purposes than those here described. 8.4 Automatic drying Initial cycle times for programmes with Auto sušení...
  • Page 26 8.5 Timed drying Dryness Level Type of fabric Load (kg) Suggested Spin speed duration (rpm) (mins) Extra Dry Cottons and Linen 170 - 190 For towelling (bathrobes, bath towels, etc) 1400 materials 110 - 130 1400 50 - 60...

  • Page 27: Before First Use

    ENGLISH Dryness Level Type of fabric Load (kg) Suggested Spin speed duration (rpm) (mins) 30 - 40 1400 9. BEFORE FIRST USE 3. Pour 2 litres of water into the During installation or before detergent compartment marked by first use you may observe some water in the appliance.

  • Page 28: Daily Use

    11. DAILY USE WARNING! CAUTION! Refer to Safety chapters. Washing heavily oiled, greasy stains could cause damage rubber parts of the 11.1 Activating the appliance washing machine. 1. Connect the mains plug to the mains socket. 11.3 Filling the detergent and 2.
  • Page 29 ENGLISH 11.4 Check the position of the With the flap in the flap position DOWN: • Do not use gelatinous 1. Pull out the detergent dispenser until or thick liquid it stops. detergents. 2. Press the lever down to remove the •...
  • Page 30 Changing the delay start after To perform washing only, make sure that only the the countdown has started Praní indicator is on above To change the delay start: the MÓD button. 1. Touch the Start/Pauza button to In case a selection is not pause the appliance.
  • Page 31 ENGLISH 11.11 Cancelling a running About 20 minutes after the programme programme start, the programme duration could 1. Press the Zap./Vyp. button to cancel be adjusted again depending the programme and to deactivate the on the capacity of water appliance. absorption of the fabrics.
  • Page 32 11.13 End of the programme • The door stays locked. • You must drain the water to open the When the programme has finished, the door: appliance stops automatically. The 1. If necessary, touch the Odstřeďování acoustic signals operate (if they are button to decrease the spin speed active).

  • Page 33: Daily Use - Washing & Drying

    ENGLISH 12. DAILY USE - WASHING & DRYING 12.2 Washing and Drying - WARNING! Automatic levels Refer to Safety chapters. 1. Tap on the Auto sušení button This appliance is an repeatedly until the display shows the automatic washer dryer. required dryness level.

  • Page 34: Daily Use - Drying Only

    • Press the button Zap./Vyp. for some In the display the door locked seconds to deactivate the appliance. indicator comes on and the indicator of the running phase starts flashing. After some minutes from The display also shows the remaining the end of the programme time.

  • Page 35: Fluff In The Fabrics

    ENGLISH 13.3 Timed Drying • The acoustic signals operate (if they are active). 1. Tap on the button Čas sušení • In the display comes on. repeatedly to set the desired time • The indicator of button Start/Pauza value (see the "Timed drying" table goes off.
  • Page 36 • Follow the washing instructions on the laundry care labels. • Do not wash white and coloured items together. • Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first couple of times.
  • Page 37 ENGLISH (60 °C max) for all types of fabric, and check the water hardness of you or special ones for woollens only. domestic system. Refer to 'Water • The choice and quantity of detergent hardness'. will depend on: type of fabric •...

  • Page 38: Care And Cleaning

    • = The drying cycle is at high WARNING! temperature To avoid creasing and shrinkage do not overdry • = The drying cycle is at reduced the laundry. temperature • = The item can not be tumble 15.11 General Tips dried.
  • Page 39 ENGLISH necessary, please contact the Authorised 2. Run a cotton programme with the Service Centre. highest temperature with a small quantity of powder detergent or, if 16.3 External cleaning available, run the Čištění pračky programme. Clean the appliance with mild soap and warm water only.
  • Page 40 Always follow the instructions that you find on the packaging of the product. 2. Run a short cotton programme at high temperature with empty drum and with a small quantity of powder detergent or, if available, run the Čištění pračky programme.
  • Page 41 ENGLISH Clean the drain pump if: • The appliance does not drain the water. • The drum does not turn. • The appliance makes an unusual noise because of the blockage of the drain pump. • The display shows the alarm code WARNING! •...
  • Page 42 1. Remove the inlet hose from the tap and clean the filter. 11. Put the filter back into the special guides by turning it clockwise. Make sure that you tighten the filter correctly to prevent leakages.

  • Page 43: Troubleshooting

    ENGLISH 16.12 Frost precautions If the appliance is installed in an area where the temperature can reach the values around 0° C or drop below, remove the remaining water from the inlet hose and the drain pump. 1. Disconnect the mains plug from the mains socket.
  • Page 44 With some problems, the display shows an alarm code and the Start/Pauza button may flash continuously: If the appliance is overloaded, remove some items from the drum and/or keep pressed the door while touching the Start/Pauza button until the indicator stops flashing (see the picture below).
  • Page 45 ENGLISH • The programme was not finished properly or the appliance stopped too early. Switch the appliance off and on again. Internal fail. No com‐ • If the alarm code appears again, contact the Authorised Serv‐ munication between ice Centre. electronic elements of the appliance.
  • Page 46 Problem Possible solution • Make sure that a washing programme that ends with water in tub, has not been selected. • Make sure that the washing programme is finished. • Set the drain or the spin programme if there is water in the You cannot open the drum.

  • Page 47: Consumption Values

    ENGLISH After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. The necessary data for the service centre are on the rating plate. 17.2 Emergency door To open the door, proceed as follows: opening 1.
  • Page 48 The QR code on the energy label supplied with the appliance provides a web link to the information related to the performance of the appliance in the EU EPREL database. Keep the energy label for reference together with the user manual and all other documents provided with this appliance.
  • Page 49 ENGLISH Wash and dry cycle Eco 40-60 pro‐ gramme and Litres hh:mm °C Cupboard dry level Full load 3.255 78.0 06:05 0.00 35.0 1400 Half load 1.750 44.0 04:20 0.00 32.0 1400 1) Maximum spin speed. Power consumption in different modes Off (W) Stand-by (W) Delay start (W)

  • Page 50: Environmental Concerns

    18.5 Common programmes - Wash and dry These values are indicative only. Programme Litres hh:mm °C Syntetika 1.800 70.0 03:25 1.00 40.0 1200 40°C 1) Maximum spin speed. 19. ENVIRONMENTAL CONCERNS appliances marked with the symbol Recycle materials with the symbol with the household waste.
  • Page 52 www.aeg.com/shop...

Table of Contents