Table of Contents
Advertisement
32
www.aeg.com
13.8
Time Dry
Thanks to this option it is possible to set
the most suitable time for the fabrics to
dry (refer to "Timed drying" table). The
display shows the set value:
1. Tap on the Time Dry bar to enter the
submenu.
2. Scroll left or right the hour and/
minute bars to set the desired drying
time.
When you return to program summary
screen, the set time is shown next to the
symbol
updated.
The minimum drying time is
10 minutes.
13.9
Stains
1. Tap on the Stains bar to enter the
submenu.
2. Tap on the bar of the option you want
to set:
• Stains
Select this option to pre-treat heavily
soiled or stained laundry using stain
remover.
Pour the stain remover into
compartment
is pre-mixed and heated with
detergent in order to improve its
effectiveness.
This option can increase
the program duration.
This option is not
available with a
temperature lower than
40 °C.
• Prewash
Use this option to add a prewash
phase at 30 °C before the washing
phase.
This option is recommended for
heavily soiled laundry, especially if
containing sand, dust , mud and other
solid particles.
This option can increase
the program duration.
• Soak
and the program duration is
. The stain remover
Use this function for heavy soiled
garments. The appliance soaks the
laundry at 30°C for about half an hour
before washing.
When you return to program summary
screen, the shortcut
13.10
Extra Rinse
With this option you can add up to 3
rinses accordingly to the selected
washing programs.
Useful for people allergic to detergents
and with sensitive skin.
1. Tap on the Extra Rinse bar to enter
the option submenu.
2. Scroll the bar right to add from 1, 2 or
3 additional rinses (OFF= no
additional rinse).
When you return to program summary
screen, the shortcut
dots indicate the number of additional
rinses selected.
This option increases the
program duration.
If the Extra Rinse is set as a
default option and you select
a compatible washing
program, the touch
screen will show
case, by setting the Extra
Rinse option , it is possible
to add just one rinse
13.11
Plus Steam
This option adds a steam phase followed
by a short anti-crease phase at the end
of the washing program.
The steam phase reduces fabric
creasing and facilitates the fabric ironing.
Tap on the Plus Steam bar to activate
the option (ON status).
This option can increase the
program duration.
A small laundry load helps to
reach better results.
will be on.
will be on. The
. In this
.
Advertisement
Table of Contents
