Table of Contents
Advertisement
for about 3 minutes.
3. Configure the AEG Home app on
your smart device.
4. If the connectivity is configured, a
message appears on the appliance
display to confirm that the
configuration was successful.
Connected!
Signal strenght is good, 4/5
5. Tap on OK to get back to the
machine settings list.
6. Tap on Programs to get back to
the program list screen.
Switching the wireless
connection off
1. In the program list screen, tap on
the shortcut
to enter the setting
menu.
2. Tap on the Wi-Fi bar, and a new
menu is shown.
3. Tap on Turn off .
Removing the wireless
credentials
1. In the program list screen, tap on
the shortcut
to enter the setting
menu.
2. Tap on the Wi-Fi bar, and a new
menu is shown.
3. Tap on Reset network.
10.3
Remote Start Mode
You can start and stop a washing
program remotely.
When the App is installed and the
wireless connection is complete, the
Remote Start Mode option will appear
among the available options of each
program.
To activate the remote start:
1. In the program list screen, select the
desired program.
2. When the program summary screen
appears, tap on
the option list.
3. Tap on the Remote Start Mode bar
to activate it (ON status). The
following message pops up:
4. Press the Start/Pause button to
activate the Remote Start Mode.
The indicators
and
program summary screen and the door is
locked.
If the door is open, the
Remote Start Mode is
deactivated.
If you pause or stop the
cycle remotely, the door
remains locked. To unlock
the door, you should be in
front of the appliance and
press the Start/Pause. To
avoid accidental unlocking of
the doors, the Child Lock
option can be activated.
WARNING!
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
10.4 Over-the-air update
The App may propose an update for
downloading new features.
The update is accepted via App only.
ENGLISH
21
More to enter
appear on the
Advertisement
Table of Contents
