Daily Use - Washing Only - AEG LWX9A9613C User Manual

34 www.aeg.com
13.16 Remote Start Mode
The remote start is available
after you have completed
the App installing and
downloading and appliance
wireless connection. Refer to
"Wi-Fi Connectivity setup"
chapter.
With this option you can start a washing
program remotely.

14. DAILY USE - WASHING ONLY

WARNING!
Refer to Safety chapters.
14.1 Using weight sensors
For a correct use of the
weight sensor, the drum
must be empty when
activating the appliance.
Set the program
BEFORE you put the
laundry in the drum.
14.2 Before activating the
appliance
1. Make sure that the mains plug is
connected to the mains socket.
2. Make sure that the water tap is open.
14.3 Activating the appliance
Press the On/Off button to turn the
appliance on.
A short tune sounds (if activated). The
indicator Wash comes on.
The led of Start/Pause button flashes.
Tap on the Remote Start Mode bar to
activate it.
When you return to program summary
screen, the shortcut
door will be locked.
If Remote Start Mode is
activated, the Stand-by
function doesn't deactivate
the appliance.
14.4 Stand-by function
The Stand-by function automatically
deactivates the appliance to decrease
the energy consumption when:
• You do not use the appliance for 5
minutes before pressing the Start/
Pause button and turning the
appliance on.
Press the On/Off button to activate
the appliance again.
• After 5 minutes from the end of the
washing program.
Press the On/Off button to activate
the appliance again.
The display shows the end of the last
set program.
Turn the program dial to set a new
cycle.
If you set a program or an
option that ends with water in
the drum, the Stand-by
function doesn't deactivate
the appliance to remind you
to drain the water.
If Remote Start Mode is
activated, the Stand-by
function doesn't deactivate
the appliance.
14.5 Setting a program
1. Turn the program dial to set the
desired program.
will be on and the