Auto Provision - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

Auto Provision

On the System / Auto Provision page, you can enable the Auto Provision function.
The Auto Provision function allows your ISP to manage the device's settings remotely: DWR-921
connects to the ISP's server, compares the current configuration file with the configuration file
stored on this server, and updates its settings if the files are different.
Figure 183. The page for configuring the Auto Provision function.
You can specify the following parameters:
Parameter
Enable Auto Provision
Use BOOTP option
Autoconfiguration
server address
File name
Move the switch to the right to enable the Auto Provision function.
Move the switch to the left to disable the Auto Provision function.
If the switch is moved to the right, the parameters of your ISP's
server (the address, the location of the configuration file, and the
protocol) are automatically specified using DHCP options 66 and
67. Upon that a connection of the Dynamic IPv4 type should be
configured on the Connections Setup / WAN page.
If the switch is moved to the left, the parameters of your ISP's server
should be specified manually.
The IP or URL address of your ISP's server where the configuration
file is stored.
The location of the configuration file on the ISP's server.
Page 243 of 255
Configuring via Web-based Interface
Description