Selecting Operation Mode; Router - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

Selecting Operation Mode

Select the needed operation mode and click the NEXT button.

Router

In order to connect your device to a wired ISP, on the Device mode page, from the Connection
method list, select the Wired connection value. Then from the Work mode list select the
Router value. In this mode you can configure a WAN connection, set your own settings for the
wireless network, configure LAN ports to connect an STB or VoIP phone, and set your own
password for access to the web-based interface of the device.
In order to connect your device to the network of a 3G or LTE operator, on the Device mode
page, from the Connection method list, select the Mobile Internet value. In this mode you can
configure an LTE WAN connection, set your own settings for the wireless network, and set your
own password for access to the web-based interface of the device.
Figure 34. Selecting an operation mode. The Mobile Internet mode.
Figure 33. Selecting an operation mode. The Router mode.
Page 43 of 255
Configuring via Web-based Interface