Access Point Or Repeater - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

Access Point or Repeater

In order to connect your device to a wired router for adding a wireless network to the existing local
network, on the Device mode page, from the Connection method list, select the Wired
connection value. Then from the Work mode list select the Access point value. In this mode
you can change the LAN IP address, set your own settings for the wireless network, and set your
own password for access to the web-based interface of the device.
Figure 36. Selecting an operation mode. The Access point mode.
In order to connect your device to a wireless router for extending the range of the existing wireless
network, on the Device mode page, from the Connection method list, select the Wi-Fi value.
Then from the Work mode list select the Repeater value. In this mode you can change the LAN
IP address, connect your device to another access point, set your own settings for the wireless
network, and set your own password for access to the web-based interface of the device.
Figure 37. Selecting an operation mode. The Repeater mode.
Page 45 of 255
Configuring via Web-based Interface