Client - D-Link DWR-921 User Manual

DWR-921 4G LTE Router
User Manual

Client

On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access
point or to a WISP.
To configure the router as a client, move the Enable switch to the right. Upon that the following
fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4 GHz
Connecting to network
In the Wireless Networks section, the list of available wireless networks is displayed. To view
the latest data on available wireless networks, click the UPDATE LIST button.
To connect to a wireless network from the list, select the needed network. Move the Network
options switch to the right to view more detailed information on the network to which the router
connects. If a password is required, enter it in the relevant field. Click the CONNECT button.
Figure 127. The page for configuring the client mode.
If the switch is moved to the left, devices cannot connect to the
router's WLAN. Upon that the router can connect to another access
point as a wireless client.
A method for connecting to another access point.
Page 158 of 255
Configuring via Web-based Interface
Description