D-Link DWR-921 User Manual page 109

DWR-921 4G LTE Router
User Manual
Parameter
Routed IPv6 network
Set MTU automatically
MTU
When all needed settings are configured, click the APPLY button.
After clicking the button, the window for additional configuration of the connection opens.
To use this WAN connection to access the Internet, select the to the Internet choice of the radio
button. Then select an existing connection which will be used to access the server or select the
create a new connection choice of the radio button and click the CONTINUE button.
Enter the address of the routed IPv6 subnet (without specifying the
prefix length) provided by the tunnel broker.
Move the switch to the right to set the maximum size of units
transmitted by the interface automatically.
Move the switch to the left to specify this parameter manually.
Upon that the MTU field is displayed.
The maximum size of units transmitted by the interface.
Page 109 of 255
Configuring via Web-based Interface
Description