Table of Contents
Advertisement
YPP6830 Pulse Input Rate/Totalizer
Instruction Manual
Standby Mode (STANDBY)
Standby mode is available on battery powered and battery backup models only.
The Standby menu is used to enter a power-saving standby mode that will turn off
the display and activate a low power mode for the through-glass buttons. Signal
processing operations will continue to run. This mode may be used to reduce power
consumption and increase battery life when the meter is not in use.
It may take up to 3 seconds for the meter to enter standby mode after confirming the
flashing display with the Enter button.
Wakeup the Meter (WAKEUP?)
To bring the meter out of standby mode, press any button and Wakeup (WAKEUP?)
will flash. If using Through-Glass buttons, it may be required to hold the button for
several seconds.
Confirm that the meter should awaken to run mode by pressing the Enter key while
WAKEUP? is flashing. The meter will return to the normal run mode.
87
Advertisement
Table of Contents
