Table of Contents
Advertisement
2
Insert the wheel into the booklet sheet size opening at the
front of Folder/Stapler, and turn the wheel slowly until it
locks into position.
Turn the wheel in the direction indicated by the appropriate book-
let size. For 5.5" x 8.5" booklets (8.5" x 11" sheets) turn the wheel
clockwise, and for 8.5" x 11" booklets (11" x 17" sheets) turn the
wheel counterclockwise.
»
Note: The wheel is hard to turn and may require some force to
get it to the locked position.
3
Remove the adjustment wheel, and put it back in its storage
area.
4
Continue at the appropriate section based on your needs.
If you need to change the position of the stapler heads, con-
tinue with "Adjusting Stapler Head Position" on page 4-27.
If you've completed all Folder/Stapler adjustments, continue
with step 5.
5
Reconnect the Folder/Stapler to the QMS 4060 Print System.
6
Place the Folder/Stapler on line.
Advertisement
Table of Contents
