Table of Contents
Advertisement
6
Install the additional stapler heads and stapler head blades
into the mounting holes located alongside the existing sta-
pler heads and blades on the Folder/Stapler frame.
7
Insert the screws and tighten to hold the stapler heads firmly
in place.
8
Tighten the stapler head blade clamping screw.
9
Attach the staple-out connector to the nearest position on
the frame.
Caution: Make sure that the cable is not in the stapler heads
staple path.
10 Load a new unit of staples in the newly installed stapler
heads.
See "Loading Staples" on page 3-3 for details on how to load
staples.
Advertisement
Table of Contents
