Table of Contents
Advertisement
that the booklet cover be printed from one of the three QMS 4060
Print System inputbins (trays). See the "Booklet Media Specifications"
section of appendix B, "Technical Specifications," for cover sheet
media specifications.
When using preprinted cover sheets, the correct position in the paper
input cassettes of the QMS 4060 Print System unit is essential. The
cover sheet is always printed last, with the cover-side facing up as it
exits the QMS 4060 Print System.
Any of the three standard trays can be used.
The inputbin from which you print the inner sheets of your booklet
depends on the size media you're using:
11"x17" —If you're printing on 11"x17" paper, you can use the
standard tray on any of the three standard inputbins (upper, mid-
dle or lower).
8.5"x11" —If you're printing on 8.5"x11" paper, you must use the
Custom 3 tray and set it up for short-edge feed. The Custom 3
tray can be used on any of the three standard inputbins.
Advertisement
Table of Contents
