Table of Contents
Advertisement
9
With the index finger and thumb, push the stapler slide down
until it clears the recessed area, and gently slide it back to
the unlocked position.
Caution: Do not let the stapler slide retract to the unlocked
position too quickly because it could damage the staple stick.
10 Close the top cover.
11 Press the Online key once to place Folder/Stapler back on
line.
The red Staple Out indicator goes off, and the green Online indi-
cator comes on.
This procedure describes how to replace a stapler head blade. The
front side of the blade contains an identification mark. If you look at
the blade from its side, the tip is pointed. Always make sure that the
blade is properly positioned.
»
Note: Replace the stapler head blade as needed. There is no set or
recommended time frame or interval for replacement. Keeping the
stapler head clean prolongs blade life.
Use the following procedure to replace the blade.
Advertisement
Table of Contents
