Table of Contents
Advertisement
Trimming
Method
Trimming
Capacity
Error Control
Interfaces
Relay contact 24 VDC, 9-pin male-to-male cable attached
to the Folder/Stapler controller.
Booklet
5.5" x 11" and 8.5" x 11" booklets
Formats
Booklet
Maximum 20 sheets of 8.5" x 11'' or 11'' x 17,'' 75g/m
Sheets
paper. The maximum thickness each sheet should not exceed 2
mm.
Paper
Up to 135 g/m
Weights
Media
Note: For a complete listing on paper weights and media
thickness, refer to the "Paper Weight Conversion Chart" on page
B-5 and the "Average Caliper Bulking Chart" on page B-7.
See Chapter 2, "Using the QDOC System," of this manual for informa-
tion on the physical characteristics, and space requirements of the
QMS QDOC Bookletmaking System.
Booklet face trimming with cutting and pressing station.
Minimum 2 sheets of 80 g/m
Maximum 40 sheets of 80 g/m
Transport control
2
(90 Lb).
2
(55 lb)
2
(55 lb)
2
(55 Lb)
Advertisement
Table of Contents
