Removing The Slide Fillers - Compaq ProLiant 6000 Series Setup And Installation Manual

2-16 Server Installation and Start Up

Removing the Slide Fillers

Two slide fillers cover the spaces on the right and left sides of the server
chassis where the rack lift assists are to be installed and the slides mount. To
remove the slide fillers:
1. With the top access panel removed, locate and lift the slide filler tabs
inside the chassis
2. Remove the slide fillers
Figure 2-7.
1 .
1
Removing the slide fillers
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
2 .
1
2