Hardware Set-Up; Setting Up - Minolta PageWorks Pro 20 Supplementary Manual

Setting Up

CAUTION
• Before opening and handling the Hard Disk Drive, touch a metal
part of the printer to avoid an electrostatic charge.
• When the Hard Disk Drive is taken out of the conductive bag or
off the mat, hold it by its edges to avoid touching the terminals or
the patterned surfaces.
• When handling the Hard Disk Drive, be sure to place it on an
anti-static mat or a piece of aluminum foil.

Hardware Set-Up

1. Turn the printer off and then discon-
nect the power cord and interface
cable from the printer.
1