Advertisement
Quick Links
ROM Plus
Quick Reference Guide - Sample Collection
1. Prepare Test
Remove ROM Plus contents from
packaging. Holding buffer vial in
upright position, remove shipping
cap and set it aside.
5a. Lift swab
Lift swab 1 cm from the bottom
of the vial.
See Instructions for Use for full instructions, warnings, precautions & contraindications
®
2-3 in
5-7cm
2. Collect Sample
Remove sterile swab from package.
Insert the swab tip into the vagina 2-3
inches (5-7 cm). Withdraw the swab
after a minimum of 15 seconds.
5b. Press swab
Press the swab stick against the
rim of the vial opening.
6. Leave tip in vial, dispose of remaining swab stick
Lab Test
If reading test in a lab, place shipping cap
back on vial and send to lab.
POC Test
If using test POC, place dropper cap on vial.
OBSTETRICS, GYNECOLOGY & NEONATAL
Accurately testing for proteins found
in cervicovaginal secretions to
diagnose ruptured fetal membranes.
3. Place swab tip
Place the swab tip into the
vial.
5c. Bend swab
Bend the swab stick 90 degrees in the forward direction
and then 180 in the reverse direction.
4. Mix
Mix the swab in the buffer
solution for 15 seconds.
Advertisement
Related Manuals for LABORIE ROM Plus
Summary of Contents for LABORIE ROM Plus
- Page 1 5-7cm 1. Prepare Test 2. Collect Sample 3. Place swab tip 4. Mix Remove ROM Plus contents from Remove sterile swab from package. Place the swab tip into the Mix the swab in the buffer packaging. Holding buffer vial in Insert the swab tip into the vagina 2-3 vial.
- Page 2 1. Place Dropper Cap 2. Place Sample into Cassette 3. Start Timer Replace shipping cap with drop Remove ROM Plus cassette. Add 4-6 drops Start timer by firmly pressing and rolling thumb over dispenser cap. of sample/buffer solution to the sample well the timer button, or use the lid on the vial.
Need help?
Do you have a question about the ROM Plus and is the answer not in the manual?
Questions and answers