MINOLTA-QMS PagePro 4110W User Manual page 108

7
9
Connect the power cable to the printer (see page 2-13) and switch on
the printer (see page 2-14).
10
Connect the printer to the computer (see page 2-17), switch on the
computer and start up Windows.
11
Display the "Printer Information" box in the Status Display (see page
5-5).
12
Verify that the installed printer memory is shown correctly in the Printer
Information box.
?
What if the total amount of memory is not displayed correctly?
Ü
Check whether the modules were installed correctly.
Ü Check the setting in the printer driver.
You want to remove a memory module?
To remove a memory module, press the tabs (one one each side of
the installation slot) outwards. This releases the module and allows
you to take it out.
7-10
Installing optional accessories