U-Line H-4805 Quick Start Manual

H-4805, H-4806, H-6940
H-6941, H-7802, H-8190
FIRE-RESISTANT FILE CABINET
NOTE: During shipment, the gypsum insulation
of the file cabinet may create a film of dust on
the exterior and interior. This is a normal settling
process. Wipe the cabinet and drawers with a
damp cloth to remove the dust. Fire-resistant
file cabinets are asbestos-free.
NOTE: If keys are lost or need to be replaced,
contact Uline Customer Service at
1-800-295-5510.
STANDARD KEY PLUNGER LOCK
OPERATION
TO LOCK
Push the lock plunger in until
it snaps into place.
(See Figure 1)
NOTE: Key is not
required to lock the
plunger lock.
TO UNLOCK
Insert key into lock. Turn to
the right until the plunger
pops out. (See Figure 2)
PAGE 1 OF 3
1-800-295-5510
uline.com
USE AND CARE
Figure 1
Figure 2
LOCK BYPASS OPERATION
The lock bypass lever is designed to allow access to
certain drawers while others remain locked.
If one or more of the drawers will not lock, check
the lock bypass lever. The lever needs to be in the
deactivated position for the drawer to lock.
ACTIVATING
Lift lever with thumb until it rests above the dimple at the
top of the side catch assembly. (See Figure 3)
NOTE: The drawer will not lock with the lever in
this position.
Figure 3
Dimple
Lever
Side Catch Assembly
DEACTIVATING
Press down on lever until it is positioned below the
dimple and rests on the channel. (See Figure 4)
NOTE: The drawer will lock with the lever in this
position.
Figure 4
Dimple
Lever
Side Catch Assembly
Para Español, vea página 2.
Pour le français, consulter la page 3.
Lever Shown
in Unlocked
Position
Spring
Channel
Lever Shown in
Locked Position
Spring
Channel
0322 IH-4805