Controls And Diagnostics; Ports; Leds And Buttons - ProFire PF3100 Information Manual

CONTROLS AND DIAGNOSTICS

The following is a list of all of the user interface items on the Ion Pilot card.

3.1 | Ports

PFRN PORTS
1 PFRN IO Network Port
This port is classified as an IO class port and is also the port through which the card is
powered. See the Card Diagram for the port location.

3.2 | LEDs and Buttons

POWER LED
A Power LED is located next to the PFRN port indicating whether the port is receiving power from the
network.
INDICATION
Off
On
LINK LED
A link LED is located next to the PFRN port indicating traffic on the PFRN port.
INDICATION
Off
On
Blinking
FAULT LED ERRORS*
A bank of Fault LEDs corresponds to the state of a specific input or output as noted below.
INPUT/OUTPUT COLOR
Pilot Red
Main Red
Coil Red
LEL Red
*If one of these lines is not required for the application and is left unused, a fault will be present but the
system will still be functional.
COLOR
-
Blue
COLOR
-
Green
Green
ERROR
Wiring error. Reporting as open, grounded, etc.
Wiring error. Reporting as open, grounded, etc.
Fault in ignition.
Fault in LEL wiring / signaling.
10
STATE
Port is not powered
Port is powered
STATE
PFRN network is not available
PFRN network is ready for
communication
Indicates that network traffic is going
through the link