Table of Contents
Advertisement
Installation Precautions
Note the following important precautions when selecting a location for the printer
and when connecting it to a power source.
Selecting a Location for the Printer
A proper location helps to ensure that your printer provides you with the long ser-
vice life for which it is designed. Double-check to make sure that the location you
select has the following characteristics.
• Choose a location that is well-ventilated.
• Make sure there is no chance of ammonia or other organic gasses being gener-
ated in the area.
• The power outlet you plan to connect to for power should be nearby and unob-
structed.
• Make sure that the printer is not exposed to direct sunlight.
• Avoid areas in the direct airflow of air conditioners, heaters, or ventilators, and
areas subjected to temperature and humidity extremes.
• Choose a sturdy, level surface where the printer will not be exposed to strong
vibration.
• Keep the printer away from any objects that might block its heat vents.
• Do not locate the printer near curtains or other combustible objects.
• Choose an area where there is no possibility of the printer being splashed with
water or other liquids.
• Make sure that the surrounding area is clean, dry, and free of dust.
Power Source
The following are the power source requirements for this printer.
Power supply:
220–240 V at 50–60 Hz
Voltage fluctuation:
220–240 V 10%
Frequency fluctuation:
Within 3 Hz
En-13
Advertisement
Table of Contents
