Table of Contents
Advertisement
Installing the Face-Up Tray
1
Remove the face-up tray from its carton.
2
Gently bend the output tray inwards,
toward the printer, with both hands.
Align the insertion pins of the tray
with the pin holders of the printer.
Note
• Whenever the face-up tray is not
installed on the printer, check to make
sure the set to switch for output to the
face-down tray (see above illustration).
• Never lay the face-up tray towards the
front of the printer or apply excessive to
it.
3
Use the switch which is located on
the right-rear side of the printer and
select the output direction.
a: Face-down tray
b: Face-up tray
a
b
En-36
a
b
Advertisement
Table of Contents
