Default Setting - Konica Minolta Magicolor 7450 User Manual

Konica minolta magicolor 7450: users guide
Hide thumbs Also See for Magicolor 7450:
Table of Contents

Advertisement

! "
All factory default values are shown in bold.
JOB
TIME-
OUT
ETHER-
NET
Configuration Menu Overview
Settings
5 seconds-15 seconds-300 seconds
Specify the timeout interval for a print job being received.
TCP/IP
ENABLE
IP
ADDRESS
SUBNET
MASK
DEFAULT
GATEWAY
DHCP/
BOOTP
Settings
YES/NO
YES
If
is selected, TCP/IP is enabled.
If
NO
is selected, TCP/IP is disabled.
Setting
000.000.000.000
Set the IP address for this printer on the
network.
Use the Up, Down, Left, and Right keys
to specify the value.
If the IP address is manually specified,
DHCP/BOOTP
is automatically set to
OFF
.
Setting
255.255.000.000
Specify the subnet mask for the network.
Use the Up, Down, Left, and Right keys
to specify the value.
Setting
000.000.000.000
Specify the IP address of the router if one
is on the network. Use the Up, Down,
Left, and Right keys to specify the value.
Settings
ON/OFF
Select whether or not the IP address is
automatically acquired.
If
ON
is selected, the IP address is auto-
matically acquired.
If
OFF
is selected, the IP address is not
automatically acquired.
65

Advertisement

Table of Contents
loading

Table of Contents