Konica Minolta Magicolor 7450 User Manual page 57

TRAY 3
TRAY 4
TRAY 5
TRAY
CHAINING
TRAY
MAPPING
Configuration Menu Overview
The size of media loaded in Tray 3/4/5 is
PAPER
indicated. For media sizes that can be
SIZE
automatically detected, refer to "DETECT
PAPER SIZE" on page 72.
This menu item only shows the current
setting. This setting cannot be changed.
Settings
PAPER
TYPE
Select the setting for the type of media
loaded into Tray 3/4/5.
Settings
ON/OFF
If ON is selected and the specified tray runs out of
media during printing, a tray loaded with media of the
same size is automatically selected so printing can
continue.
If OFF is selected and the specified tray runs out of
media, printing stops.
Settings
TRAY
MAPPING
If ON
MODE
can be selected and the assigned tray of
this printer can be used.
OFF
If
be used.
This setting is used to link a tray setting
specified from a third-party printer driver
with trays on this printer.
Settings
LOGICAL
TRAY 0-9
The physical tray assigned to each
logical tray can be specified.
! "
! "
ANY/PLAIN PAPER/
RECYCLED
ON/OFF
is selected, logical tray 0 through 9
is selected, a logical tray cannot
PHYSICAL TRAY1-5
The default setting for
TRAY 0 PHYSICAL TRAY2
is
The default setting for all other
trays is PHYSICAL TRAY1
PHYSICAL TRAY 3/4/5 appear
only if an optional lower feeder unit
is installed.
LOGICAL
.
.
43