Fagor C A-0623-E Original Installation Manual page 25

2. Safety instructions >
•
DO NOT leave flammable products or objects inside or around the equipment.
•
Keep the ventilation inlets clear of obstacles.
NON-COMPLIANCE WITH THESE RULES OR IMPROPER USE OF THE APPLIANCE EXEMPTS THE
MANUFACTURER FROM ANY POSSIBLE WARRANTY OR CLAIM
To ensure that the appliance is in perfect operating and safety conditions, it is recommended to
have it serviced and inspected by an authorised service centre at least once a year.
During prolonged periods of inactivity, it is recommended to disconnect the appliance from the
water and electricity supply.
Burn and injury hazard
During cooking and until all parts of the equipment have cooled down, take the following
precautions:
•
Only touch the control knobs and handle. External metal parts and the door glass reach
very high temperatures (>60°C).
•
When opening the door, do so slowly, taking care of the steam coming out of the very
hot cooking chamber
•
Always wear heat-resistant clothing when handling objects inside the cooking chamber.
•
Remove the probe from the core before removing the trays, and place it in its holder,
ensuring that the cable does not obstruct the removal of trays.
Exercise extreme care when removing trays from the chamber when the top tray is at a
height of 160 cm or higher. There is a risk of burns caused by the hot contents of GN trays.
Fire hazard
Before use, make sure that there are no improper objects inside the equipment (manuals,
plastics, etc.) and that the smoke outlet is free from obstructions.
Do not place heat sources, flammable or combustible substances near the equipment.
Do not use highly flammable foods or liquids (e.g. alcohol) during cooking.
Clean the cooking chamber regularly. Accumulated food and fat residues can catch fire.
Cooking with alcohol is not permitted.
ELECTRICAL SHOCK HAZARD
Do not open compartments marked with this symbol. Access is restricted to personnel
qualified and authorised by FAGOR only. Failure to comply with this rule invalidates the
warranty and exposes the user to the risk of damage and injury that could be fatal.
CORROSIVE HAZARD
4