Item
Operation System
CPU
Protocol
Interface
Web Browser
Audio
For IPv6 Connection
Item
Operation System
CPU
Protocol
Interface
Web Browser
Audio
Note:
See Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for the latest information about web browser.
7.2. CONNECT THE CAMERA TO YOUR ROUTER
Connect the camera to your router with an Ethernet cable to set up the camera.
- Before you begin the installation, the UPnP feature in your router
needs to be enabled. Usually, the default setting disables this feature.
For more info, please visit, http://panasonic.co.jp/pcc/products/en/
netwkcam/ or contact your router's manufacturer.
- These instructions assume your PC is already connected to the Internet
and your home network includes a router that is UPnP and Play)
compliant.
Microsoft Windows XP
Microsoft Windows 2000
Microsoft Windows Me
Microsoft Windows 98SE
-
For viewing single camera
Pentium
III (800 MHz or greater is recommended.)
-
For viewing multiple cameras
Pentium
4 (1.8 GHz or greater is recommended.)
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
10/100 Mbps network card installed
Internet Explorer 6.0 or later (Not included on the Setup CD-ROM)
Audio input/output feature (Microphone or speaker)
Microsoft Windows XP Service Pack 1 or later
-
For viewing single camera
Pentium
III (800 MHz or greater is recommended.)
-
For viewing multiple cameras
Pentium
4 (1.8 GHz or greater is recommended.)
TCP/IP protocol (HTTP, TCP, UDP, IP, DNS, ICMPPv6, NDP)
10/100 Mbps network card installed
Internet Explorer 6.0 or later (Not included on the Setup CD-ROM)
Audio input/output feature (Microphone or speaker)
Description
Description
15