Default Settings For Manual Mode - Siemens SINUMERIK 840D sl Universal Operating Manual

6.6

Default settings for manual mode

Specify the configurations for the manual mode in the "Settings for manual operation" window.
Default settings
Settings
Type of feedrate
Setup feedrate G94
Setup feedrate G95
Variable increment
Spindle speed
Procedure
Universal
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Meaning
Here, you select the type of feedrate.
• G94: Axis feedrate/linear feedrate
• G95: Revolutional feedrate
Enter the desired feedrate in mm/min.
Enter the desired feedrate in mm/rev.
For variable increments, enter the desired increment when traversing axes.
Here, enter the desired spindle speed in rpm.
1. Select the "Machine" operating area.
2. Press the <JOG> key.
3. Press the menu forward key and the "Settings" softkey.
The "Settings for manual operation" window is opened.
Working in manual mode
6.6 Default settings for manual mode
135