Different Views Of The Workpiece; Overview; Plan View - Siemens SINUMERIK 840D sl Universal Operating Manual

Simulating machining

8.5 Different views of the workpiece

8.5 Different views of the workpiece
8.5.1

Overview

In the graphical display, you can choose between different views so that you constantly have the
best view of the current workpiece machining, or in order to display details or the overall view
of the finished workpiece.
The following views are available:
• Top view
• 3D view (with option)
• Side views
• Machine space (with "collision avoidance" option)
8.5.2

Plan view

Display as a top view
Changing the display
You can increase or decrease the size of the simulation graphic and move it, as well as change
the segment.
See also
Enlarging or reducing the graphical representation (Page 230)
Panning a graphical representation (Page 231)
Modifying the viewport (Page 232)
224
1. Simultaneous recording or the simulation is started.
2. Press the "Top view" softkey.
The workpiece is shown from above in the top view.
Operating Manual, 07/2021, 6FC5398-6AP40-6BA4
Universal