Table of Contents
Advertisement
The system software in your QMS 2060 Print System is stored in
flash ROM, read-only memory that can be erased and rewritten to "in
a flash." This allows you to update the system software without open-
ing up the printer and installing new PROMs.
Updated system software allows you to take advantage of future
enhancements to the printer. Use the Administration/Miscellaneous/
New Flash Image menu to update the system software (image in flash
ROM).
Administration/Miscellaneous/New Flash Image
Menu
Yes—Download new system code
Choices
No—Don't download new system code
Yes
Default
This section lists the minimum requirements needed to download sys-
tem software to your QMS 2060 via a Macintosh, parallel port, serial
port, or Ethernet port.
A minimum of 1.5 MB of free disk space on the Macintosh
Connection from the Macintosh serial port to the serial port of the
printer. The cable must be wired as a null modem, or a null
modem adaptor must be attached (see appendix B, "Technical
Specifications," of the Reference for cable information).
This is the recommended method for downloading from a PC
because it is the fastest method and because no additional cables or
changes of port settings are required.
A minimum of 1.5 MB of free disk space on the PC
Advertisement
Table of Contents
