QMS 1060E Operation page 66

3 After replacing the cassette, open the printer's top cover,
and then close it again to reset the paper jam message.
The printer resets itself to continue operations.
» Note: Leaving print media in the multipurpose tray can cause the
print media position to shift during removal of the jam. This may result
in a media feed failure and another jam when printing is restarted.
1 Open the multipurpose tray cover.
2 Remove all print media remaining in the multipurpose tray.
3 If the jam has been cleared, close the multipurpose tray
cover and printing will restart.
If you are unable to locate the jam in the multipurpose tray area,
check the areas for locating jams when using a cassette
described earlier in this chapter.